How to Become an Aircraft and Avionics Equipment Mechanic or Technician
Some aircraft and avionics equipment mechanics and technicians learn their trade on the job.
Some aircraft and avionics equipment mechanics and technicians learn their trade at an Federal Aviation Administration (FAA)-approved aviation maintenance technician school. Others are trained on the job or learn through training in the military. Aircraft mechanics and avionics technicians typically are certified by the FAA. (See Title 14 of the Code of Federal Regulations (14 CFR), part 65, subparts D and E, for the most current requirements for becoming a certified mechanic.)
Aircraft mechanics and service technicians typically enter the occupation after attending a Part 147 FAA-approved aviation maintenance technician school. These schools award a certificate of completion that the FAA recognizes as an alternative to the experience requirements stated in regulations. The schools also grant holders the right to take the relevant FAA exams.
Avionics technicians typically earn an associate’s degree before entering the occupation. Aircraft controls, systems, and flight instruments have become increasingly digital and computerized. Workers who have the proper background in aviation flight instruments or computer repair are needed to maintain these complex systems
Some aircraft mechanics and service technicians enter the occupation with a high school diploma or equivalent and receive on-the-job training to learn their skills and to be able to pass the FAA exams. Aviation maintenance personnel who are not certified by the FAA work under supervision until they have enough experience and knowledge and become certified.
Licenses, Certifications, and Registrations
The FAA requires that aircraft maintenance be done either by a certified mechanic with the appropriate ratings or authorizations or under the supervision of such a mechanic.
The FAA offers separate certifications for bodywork (Airframe mechanics, or “A”) and engine work (Powerplant mechanics, or “P”), but employers may prefer to hire mechanics who have both Airframe and Powerplant (A&P) ratings. The A&P ratings generally certify that aviation mechanics meet basic knowledge and ability standards.
Mechanics must be at least 18 years of age, be fluent in English, and have 30 months of experience to qualify for either the A or the P rating or both (the A&P rating). Completion of a program at a Part 147 FAA-approved aviation maintenance technician school can substitute for the experience requirement and shorten the time requirements for becoming eligible to take the FAA exams.
Applicants must pass written, oral, and practical exams that demonstrate the required skills within a timeframe of 2 years.
To keep their certification, mechanics must have completed relevant repair or maintenance work within the previous 24 months. To fulfill this requirement, mechanics may take classes from their employer, a school, or an aircraft manufacturer.
The Inspection Authorization (IA) is available to mechanics who have had their A&P ratings for at least 3 years and meet other requirements. These mechanics are able to review and approve many major repairs and alterations.
Avionics technicians typically are certified through a repair station for the specific work they perform on aircraft, or they hold the Airframe rating to work on an aircraft’s electronic and flight instrument systems. An Aircraft Electronics Technician (AET) certification is available through the National Center for Aerospace & Transportation Technologies (NCATT). It certifies that aviation mechanics have a basic level of knowledge in the subject area, but it is not required by the FAA for any specific tasks. Avionics technicians who work on communications equipment may need to have the proper radiotelephone operator certification issued by the Federal Communications Commission (FCC).
Work Experience in a Related Occupation
Some avionics technicians begin their careers as aircraft mechanics and service technicians. As aircraft mechanics and service technicians gain experience, they may attend classes or otherwise choose to pursue additional certifications that grant privileges to work on specialized flight instruments. Eventually, they may become avionics technicians who work exclusively on flight instruments.
As aircraft mechanics gain experience, they may advance to lead mechanic, lead inspector, or shop supervisor. Opportunities to advance may be best for those who have an inspection authorization (IA). Mechanics with broad experience in maintenance and repair may become inspectors or examiners for the FAA.
Detail oriented. Mechanics and technicians need to adjust airplane parts to exact specifications. For example, they often use precision tools to tighten wheel bolts to a specified tension.
Dexterity. Mechanics and technicians need to coordinate the movement of their fingers and hands in order to grasp, manipulate, or assemble parts.
Observational skills. Mechanics and technicians must recognize engine noises, read gauges, and collect other information to determine whether an aircraft’s systems are working properly.
Strength. Mechanics and technicians may carry or move heavy equipment or aircraft parts, climb on airplanes, balance, and reach without falling.