Thursday, September 01, 2022
Workers in the Fort Wayne, IN Metropolitan Statistical Area had an average (mean) hourly wage of $24.20 in May 2021, 14 percent below the nationwide average of $28.01, the U.S. Bureau of Labor Statistics reported today. Regional Commissioner Jason Palmer noted that, after testing for statistical significance, wages in the local area were lower than their respective national averages in 20 of the 22 major occupational groups, including computer and mathematical; legal; and arts, design, entertainment, sports, and media. Only one group had significantly higher wages than their respective national averages: production.
When compared to the nationwide distribution, Fort Wayne area employment was more highly concentrated in 6 of the 22 occupational groups, including production, healthcare practitioners and technical, and transportation and material moving. Twelve groups had employment shares significantly below their national representation, including business and financial operations, management, and computer and mathematical. (See table A.)
|Major occupational group||Percent of total employment||Mean hourly wage|
|United States||Fort Wayne||United States||Fort Wayne||Percent difference (1)|
Total, all occupations
Business and financial operations
Computer and mathematical
Architecture and engineering
Life, physical, and social science
Community and social service
Educational instruction and library
Arts, design, entertainment, sports, and media
Healthcare practitioners and technical
Food preparation and serving related
Building and grounds cleaning and maintenance
Personal care and service
Sales and related
Office and administrative support
Farming, fishing, and forestry
Construction and extraction
Installation, maintenance, and repair
Transportation and material moving
One occupational group—production—was chosen to illustrate the diversity of data available for any of the 22 major occupational categories. Fort Wayne had 24,590 jobs in production, accounting for 11.8 percent of local area employment, significantly higher than the 6.0-percent share nationally. The average hourly wage for this occupational group locally was $21.34, significantly above the national wage of $20.71.
Some of the larger detailed occupations within the production group included miscellaneous assemblers and fabricators (7,290), machinists (2,200), and first-line supervisors of production and operating workers (1,570). Among the higher-paying jobs in this group were first-line supervisors of production and operating workers and tool grinders, filers, and sharpeners, with mean hourly wages of $30.33 and $28.11, respectively. At the lower end of the wage scale were laundry and dry-cleaning workers ($12.46) and bakers ($14.07). (Detailed data for the production occupations are presented in table 1; for a complete listing of detailed occupations available go to www.bls.gov/oes/current/oes_23060.htm.)
Location quotients allow us to explore the occupational make-up of a metropolitan area by comparing the composition of jobs in an area relative to the national average. (See table 1.) For example, a location quotient of 2.0 indicates that an occupation accounts for twice the share of employment in the area than it does nationally. In the Fort Wayne area, above-average concentrations of employment were found in many of the occupations within the production group. For instance, extruding and drawing machine setters, operators, and tenders, metal and plastic were employed at 8.4 times the national rate in Fort Wayne, and machinists, at 4.5 times the U.S. average. Butchers and meat cutters had a location quotient of 1.0 in Fort Wayne, indicating that this particular occupation’s local and national employment shares were similar.
These statistics are from the Occupational Employment and Wage Statistics (OEWS) survey, a federal-state cooperative program between BLS and State Workforce Agencies, in this case, the Indiana Department of Workforce Development.
With the May 2021 estimates release, the Occupational Employment and Wage Statistics (OEWS) program has implemented a new model-based (MB3) estimation method. For more information, see the May 2021 Survey Methods and Reliability Statement at www.bls.gov/oes/methods_21.pdf and the Monthly Labor Review article at www.bls.gov/opub/mlr/2019/article/model-based-estimates-for-the-occupational-employment-statistics-program.htm. OEWS estimates for the years 2015-19 were recalculated using the new estimation method and are available as research estimates at www.bls.gov/oes/oes-mb3-methods.htm.
The May 2021 OEWS estimates are also the first estimates based entirely on survey data collected using the 2018 Standard Occupational Classification (SOC) system. To improve data quality, the OEWS program aggregates some occupations to the SOC broad occupation level or as OEWS-specific combinations of 2018 SOC detailed occupations.
The Occupational Employment and Wage Statistics (OEWS) survey is a semiannual survey measuring occupational employment and wage rates for wage and salary workers in nonfarm establishments in the United States. The OEWS data available from BLS include cross-industry occupational employment and wage estimates for the nation; over 580 areas, including states and the District of Columbia, metropolitan statistical areas (MSAs), nonmetropolitan areas, and territories; national industry-specific estimates at the NAICS sector, 3-digit, most 4-digit, and selected 5- and 6-digit industry levels, and national estimates by ownership across all industries and for schools and hospitals. OEWS data are available at www.bls.gov/oes/tables.htm.
The OEWS survey is a cooperative effort between BLS and the State Workforce Agencies (SWAs). BLS funds the survey and provides the procedures and technical support, while the State Workforce Agencies collect most of the data. OEWS estimates are constructed from a sample of about 1.1 million establishments. Each year, two semiannual panels of approximately 179,000 to 187,000 sampled establishments are contacted, one panel in May and the other in November. Responses are obtained by Internet or other electronic means, mail, email, telephone, or personal visit. The May 2021 estimates are based on responses from six semiannual panels collected over a 3-year period: May 2021, November 2020, May 2020, November 2019, May 2019, and November 2018. The unweighted sampled employment of 82 million across all six semiannual panels represents approximately 62 percent of total national employment. The overall national response rate for the six panels, based on the 50 states and the District of Columbia, is 67.2 percent based on establishments and 64.5 percent based on weighted sampled employment. The sample in the Fort Wayne, IN Metropolitan Statistical Area included 2,011 establishments with a response rate of 76 percent. For more information about OEWS concepts and methodology, go to www.bls.gov/oes/current/oes_tec.htm.
A value that is statistically different from another does not necessarily mean that the difference has economic or practical significance. Statistical significance is concerned with the ability to make confident statements about a universe based on a sample. It is entirely possible that a large difference between two values is not significantly different statistically, while a small difference is, since both the size and heterogeneity of the sample affect the relative error of the data being tested.
Metropolitan area definitions
The substate area data published in this release reflect the standards and definitions established by the U.S. Office of Management and Budget.
The Fort Wayne, IN Metropolitan Statistical Area includes Allen, Wells, and Whitley Counties.
For more information
Information in this release will be made available to individuals with sensory impairments upon request. Voice phone: (202) 691-5200; Telecommunications Relay Service: 7-1-1.
|Occupation (1)||Employment||Mean wages|
|Level (2)||Location quotient (3)||Hourly||Annual (4)|
First-line supervisors of production and operating workers
Coil winders, tapers, and finishers
Electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers
Engine and other machine assemblers
Structural metal fabricators and fitters
Miscellaneous assemblers and fabricators
Butchers and meat cutters
Food and tobacco roasting, baking, and drying machine operators and tenders
Extruding and drawing machine setters, operators, and tenders, metal and plastic
Rolling machine setters, operators, and tenders, metal and plastic
Cutting, punching, and press machine setters, operators, and tenders, metal and plastic
Grinding, lapping, polishing, and buffing machine tool setters, operators, and tenders, metal and plastic
Lathe and turning machine tool setters, operators, and tenders, metal and plastic
Metal-refining furnace operators and tenders
Molding, coremaking, and casting machine setters, operators, and tenders, metal and plastic
Multiple machine tool setters, operators, and tenders, metal and plastic
Tool and die makers
Welders, cutters, solderers, and brazers
Welding, soldering, and brazing machine setters, operators, and tenders
Heat treating equipment setters, operators, and tenders, metal and plastic
Plating machine setters, operators, and tenders, metal and plastic
Tool grinders, filers, and sharpeners
Prepress technicians and workers
Printing press operators
Print binding and finishing workers
Laundry and dry-cleaning workers
Sewing machine operators
Cabinetmakers and bench carpenters
Sawing machine setters, operators, and tenders, wood
Woodworking machine setters, operators, and tenders, except sawing
Woodworkers, all other
Water and wastewater treatment plant and system operators
Chemical equipment operators and tenders
Crushing, grinding, and polishing machine setters, operators, and tenders
Grinding and polishing workers, hand
Mixing and blending machine setters, operators, and tenders
Cutting and slicing machine setters, operators, and tenders
Extruding, forming, pressing, and compacting machine setters, operators, and tenders
Inspectors, testers, sorters, samplers, and weighers
Dental laboratory technicians
Ophthalmic laboratory technicians
Packaging and filling machine operators and tenders
Painting, coating, and decorating workers
Coating, painting, and spraying machine setters, operators, and tenders
Computer numerically controlled tool operators
Computer numerically controlled tool programmers
Cleaning, washing, and metal pickling equipment operators and tenders
Etchers and engravers
Molders, shapers, and casters, except metal and plastic
Paper goods machine setters, operators, and tenders
Production workers, all other
Last Modified Date: Thursday, September 01, 2022