Welders, Cutters, Solderers, and Brazers

Summary

welders cutters solderers and brazers image
Welders, cutters, solderers, and brazers occasionally must work in awkward positions using hand-held welding, flame-cutting, and soldering tools.
Quick Facts: Welders, Cutters, Solderers, and Brazers
2015 Median Pay $38,150 per year
$18.34 per hour
Typical Entry-Level Education High school diploma or equivalent
Work Experience in a Related Occupation None
On-the-job Training Moderate-term on-the-job training
Number of Jobs, 2014 397,900
Job Outlook, 2014-24 4% (Slower than average)
Employment Change, 2014-24 14,400

What Welders, Cutters, Solderers, and Brazers Do

Welders, cutters, solderers, and brazers use hand-held or remotely controlled equipment to join or cut metal parts. They also fill holes, indentations, or seams of metal products.

Work Environment

Welders, cutters, solderers, and brazers may work outdoors, often in inclement weather, or indoors, sometimes in a confined area. They may work on a scaffold, high off the ground, and they occasionally must lift heavy objects and work in awkward positions. Although most work full time, overtime is common.

How to Become a Welder, Cutter, Solderer, or Brazer

A high school diploma or equivalent combined with technical and on-the-job training is typically required to become a welder, cutter, solderer, or brazer.

Pay

The median annual wage for welders, cutters, solderers, and brazers was $38,150 in May 2015.

Job Outlook

Employment of welders, cutters, solderers, and brazers is projected to grow 4 percent from 2014 to 2024, slower than the average for all occupations. Despite slower than average employment growth, skilled welders with up-to-date training should have good job opportunities.

State & Area Data

Explore resources for employment and wages by state and area for welders, cutters, solderers, and brazers.

Similar Occupations

Compare the job duties, education, job growth, and pay of welders, cutters, solderers, and brazers with similar occupations.

More Information, Including Links to O*NET

Learn more about welders, cutters, solderers, and brazers by visiting additional resources, including O*NET, a source on key characteristics of workers and occupations.

What Welders, Cutters, Solderers, and Brazers Do

Welders, cutters, solderers, and brazers
Welders, cutters, solderers, and brazers smooth and polish all surfaces of parts or products.

Welders, cutters, solderers, and brazers use hand-held or remotely controlled equipment to join or cut metal parts. They also fill holes, indentations, or seams of metal products.

Duties

Welders, cutters, solderers, and brazers typically do the following:

  • Study blueprints, sketches, or specifications
  • Calculate dimensions to be welded
  • Inspect structures or materials to be welded
  • Ignite torches or start power supplies
  • Monitor the welding process to avoid overheating
  • Maintain equipment and machinery

Welding is the most common way of permanently joining metal parts. In this process, heat is applied to metal pieces, melting and fusing them to form a permanent bond. Because of its strength, welding is used in shipbuilding, automobile manufacturing and repair, aerospace applications, and thousands of other manufacturing activities. Welding also is used to join steel beams in the construction of buildings, bridges, and other structures and to join pipes in pipelines, power plants, and refineries.

Welders work in a wide variety of industries, from car racing to manufacturing. The work that welders do and the equipment they use vary with the industry. Arc welding, the most common type of welding today, uses electrical currents to create heat and bond metals together—but there are more than 100 different processes that a welder can use. The type of weld normally is determined by the types of metals being joined and the conditions under which the welding is to take place.

Cutters use heat to cut and trim metal objects to specific dimensions. The work of arc, plasma, and oxy–gas cutters is closely related to that of welders. However, instead of joining metals, cutters use the heat from an electric arc, a stream of ionized gas called plasma, or burning gases to cut and trim metal objects to specific dimensions. Cutters also dismantle large objects, such as ships, railroad cars, automobiles, buildings, and aircraft. Some operate and monitor cutting machines similar to those used by welding machine operators.

Solderers and brazers also use heat to join two or more metal objects together. Soldering and brazing are similar, except that the temperature used to melt the filler metal is lower in soldering. Soldering uses metals with a melting point below 840 degrees Fahrenheit. Brazing uses metals with a higher melting point. 

Soldering and brazing workers use molten metal to join two pieces of metal. However, the metal added during the soldering or brazing process has a melting point lower than that of the piece, so only the added metal is melted, not the piece. Therefore, these processes normally do not create distortions or weaknesses in the piece, as can occur with welding.

Soldering commonly is used to make electrical and electronic circuit boards, such as computer chips. Soldering workers tend to work with small pieces that must be positioned precisely.

Brazing often is used to connect cast iron and thinner metals that the higher temperatures of welding would warp. Brazing also can be used to apply coatings to parts in order to reduce wear and protect against corrosion.

Work Environment

Welders, cutters, solderers, and brazers
Welders, cutters, solderers, and brazers wear protective clothing and goggles for safety.

Welders, cutters, solderers, and brazers held about 397,900 jobs in 2014. The industries that employed the most welders, cutters, solderers, and brazers were as follows:

Manufacturing 60%
Specialty trade contractors 6
Repair and maintenance 5
Merchant wholesalers, durable goods 4

Welders and cutters may work outdoors, often in inclement weather, or indoors, sometimes in a confined area designed to contain sparks and glare. When working outdoors, they may work on a scaffold or platform high off the ground.

In addition, they may have to lift heavy objects and work in awkward positions while bending, stooping, or standing to work overhead.

Injuries and Illnesses

Welders, cutters, solderers, and brazers are often exposed to a number of hazards, including very hot materials and the intense light created by the arc. They wear safety shoes, heat-resistant gloves, goggles, masks with protective lenses, and other equipment to prevent burns and eye injuries and to protect them from falling objects.

The Occupational Safety & Health Administration requires that welders work in safely ventilated areas in order to avoid danger from inhaling gases and fine particles that can result from welding processes. Because of these hazards, welding, cutting, soldering, and brazing workers have a rate of injuries and illnesses that is higher than the national average. However, they can minimize injuries if they follow safety procedures.

Work Schedules

Most welders, cutters, solderers, and brazers work full time, and overtime is common. Many manufacturing firms have two or three 8- to 12-hour shifts each day, allowing the firm to continue production around the clock if needed. As a result, welders, cutters, solderers, and brazers may work evenings and weekends.

How to Become a Welder, Cutter, Solderer, or Brazer

welders cutters solderers and brazers image
Welders, cutters, solderers, and brazers must have a steady hand to hold a torch in place.

A high school diploma or equivalent combined with technical and on-the-job training is typically required to become a welder, cutter, solderer, or brazer.

Education & Training

A high school diploma or equivalent combined with technical and on-the-job training is typically required to become a welder, cutter, solderer, or brazer. High school technical education courses and postsecondary institutions, such as vocational–technical institutes, community colleges, and private welding, soldering, and brazing schools offer formal technical training. In addition, the U.S. Armed Forces operate welding and soldering schools.

Courses in blueprint reading, shop mathematics, mechanical drawing, physics, chemistry, and metallurgy are helpful.

An understanding of electricity also is helpful, and knowledge of computers is gaining importance as welding, soldering, and brazing machine operators become more responsible for programming robots and other computer-controlled machines.

Although numerous employers are willing to hire inexperienced entry-level workers and train them on the job, many prefer to hire workers who have been through training or credentialing programs. Even entry-level workers with formal technical training still receive several months of on-the-job training.

Licenses, Certifications, and Registrations

Courses leading to certification are offered at many welding schools. For example, the American Welding Society offers the Certified Welder and Certified Welding Fabricator designations.

Some welding positions require general certification in welding or certification in specific skills, such as Certified Welding Inspector or Certified Robotic Arc Welding.

The Institute for Printed Circuits offers certification and training in soldering. In industries such as aerospace and defense, which need highly skilled workers, many employers require these certifications. Certification can show mastery of lead-free soldering techniques, which are important to many employers.

Some employers pay the cost of training and testing for employees.

Important Qualities

Detail oriented. Welders, cutters, solderers, and brazers perform precision work, often with straight edges and minimal flaws. The ability to see details and characteristics of the joint and detect changes in molten metal flows requires good eyesight and attention to detail.

Manual dexterity. Welders, cutters, solderers, and brazers must have a steady hand to hold a torch in one place. Workers must also have good hand-eye coordination.

Physical stamina. The ability to endure long periods of standing or repetitious movements is important for welders, cutters, solderers, and brazers.

Physical strength. Welders, cutters, solderers, and brazers must be in good physical condition. They often must lift heavy pieces of metal and move welding or cutting equipment, and sometimes bend, stoop, or reach while working.

Spatial-orientation skills. Welders, cutters, solderers, and brazers must be able to read, understand, and interpret two- and three-dimensional diagrams in order to fit metal products correctly.

Technical skills. Welders, cutters, solderers, and brazers must be able to operate manual or semiautomatic welding equipment to fuse metal segments.

Pay

Welders, Cutters, Solderers, and Brazers

Median annual wages, May 2015

Welders, cutters, solderers, and brazers

$38,150

Metal workers and plastic workers

$36,730

Total, all occupations

$36,200

 

The median annual wage for welders, cutters, solderers, and brazers was $38,150 in May 2015. The median wage is the wage at which half the workers in an occupation earned more than that amount and half earned less. The lowest 10 percent earned less than $25,940, and the highest 10 percent earned more than $60,000.

In May 2015, the median annual wages for welders, cutters, solderers, and brazers in the top industries in which they worked were as follows:

Specialty trade contractors $40,580
Repair and maintenance 38,260
Manufacturing 37,070
Merchant wholesalers, durable goods 36,380

Wages for welders, cutters, solderers, and brazers vary with the worker’s experience and skill level, the industry, and the size of the company.

Most welders, cutters, solderers, and brazers work full time, and overtime is common. Many manufacturing firms have two or three 8- to 12-hour shifts each day, allowing the firm to continue production around the clock if needed. As a result, welders, cutters, solderers, and brazers may work evenings and weekends.

Job Outlook

Welders, Cutters, Solderers, and Brazers

Percent change in employment, projected 2014-24

Total, all occupations

7%

Welders, cutters, solderers, and brazers

4%

Metal workers and plastic workers

-5%

 

Employment of welders, cutters, solderers, and brazers is projected to grow 4 percent from 2014 to 2024, slower than the average for all occupations.

Employment growth reflects the need for welders in manufacturing because of the importance and versatility of welding as a manufacturing process. The basic skills of welding are similar across industries, so welders can easily shift from one industry to another, depending on where they are needed most. For example, welders who are laid off in the automotive manufacturing industry may be able to find work in the oil and gas industry.

The nation’s aging infrastructure will require the expertise of welders, cutters, solderers, and brazers to help rebuild bridges, highways, and buildings. The construction of new power generation facilities and, specifically, pipelines transporting natural gas and oil will also result in new jobs.

Job Prospects

Overall job prospects will vary with the worker’s skill level. Job prospects should be good for welders trained in the latest technologies. However, welders who do not have up-to-date training may face strong competition for jobs.

For all welders, job prospects should be better for those willing to relocate.

Employment projections data for welders, cutters, solderers, and brazers, 2014-24
Occupational Title SOC Code Employment, 2014 Projected Employment, 2024 Change, 2014-24 Employment by Industry
Percent Numeric

SOURCE: U.S. Bureau of Labor Statistics, Employment Projections program

Welders, cutters, solderers, and brazers

51-4121 397,900 412,300 4 14,400 [XLSX]

State & Area Data

Occupational Employment Statistics (OES)

The Occupational Employment Statistics (OES) program produces employment and wage estimates annually for over 800 occupations. These estimates are available for the nation as a whole, for individual states, and for metropolitan and nonmetropolitan areas. The link(s) below go to OES data maps for employment and wages by state and area.

Projections Central

Occupational employment projections are developed for all states by Labor Market Information (LMI) or individual state Employment Projections offices. All state projections data are available at www.projectionscentral.com. Information on this site allows projected employment growth for an occupation to be compared among states or to be compared within one state. In addition, states may produce projections for areas; there are links to each state’s websites where these data may be retrieved.

Career InfoNet

America’s Career InfoNet includes hundreds of occupational profiles with data available by state and metro area. There are links in the left-hand side menu to compare occupational employment by state and occupational wages by local area or metro area. There is also a salary info tool to search for wages by zip code.

Similar Occupations

This table shows a list of occupations with job duties that are similar to those of welders, cutters, solderers, and brazers.

Occupation Job Duties ENTRY-LEVEL EDUCATION 2015 MEDIAN PAY
Assemblers and fabricators

Assemblers and Fabricators

Assemblers and fabricators assemble finished products and the parts that go into them. They use tools, machines, and their hands to make engines, computers, aircraft, ships, boats, toys, electronic devices, control panels, and more.

High school diploma or equivalent $30,080
Boilermakers

Boilermakers

Boilermakers assemble, install, and repair boilers, closed vats, and other large vessels or containers that hold liquids and gases.

High school diploma or equivalent $60,120
Jewelers and precious stone and metal workers

Jewelers and Precious Stone and Metal Workers

Jewelers and precious stone and metal workers design, manufacture, and sell jewelry. They also adjust, repair, and appraise gems and jewelry.

High school diploma or equivalent $37,060
Machinists and tool and die makers

Machinists and Tool and Die Makers

Machinists and tool and die makers set up and operate a variety of computer-controlled and mechanically controlled machine tools to produce precision metal parts, instruments, and tools.

High school diploma or equivalent $42,110
Metal and plastic machine workers

Metal and Plastic Machine Workers

Metal and plastic machine workers set up and operate machines that cut, shape, and form metal and plastic materials or pieces.

High school diploma or equivalent $34,080
Plumbers, pipefitters, and steamfitters

Plumbers, Pipefitters, and Steamfitters

Plumbers, pipefitters, and steamfitters install and repair pipes that carry liquids or gases to, from, and within businesses, homes, and factories.

High school diploma or equivalent $50,620
Sheet metal workers

Sheet Metal Workers

Sheet metal workers fabricate or install products that are made from thin metal sheets, such as ducts used in heating and air conditioning systems.

High school diploma or equivalent $45,750
Suggested citation:

Bureau of Labor Statistics, U.S. Department of Labor, Occupational Outlook Handbook, 2016-17 Edition, Welders, Cutters, Solderers, and Brazers,
on the Internet at http://www.bls.gov/ooh/production/welders-cutters-solderers-and-brazers.htm (visited May 04, 2016).

Publish Date: Thursday, December 17, 2015